Crochet Ghost Pot Holder Free Pattern

Sharing is caring!

A crochet ghost pot holder makes for the cutest Halloween decor for the kitchen. Bake your favorite spooky treats with the help of this adorable ghost.

This post contains affiliate links. At no extra cost to you, I may receive a small commission from purchases made through affiliate links, which helps me to keep bringing awesome free content!

Halloween is my favorite holiday and this year I really have heart eyes for Ghost decorations! The cute ones though, not the creepy version.

Naturally this meant that I needed to make at least one Crochet Ghost pattern.

And since you know I love to design potholders, a crochet ghost pot holder just makes sense!

Just like all the other potholders I have made, this crochet ghost pot holder has a front pocket for gifting baking mixes, utensils, and even recipe cards!

Our new crochet ghost friend is holding a cute little pumpkin, which means he will look adorable hanging next to the Pumpkin Pot Holder!

Both the Crochet Ghost Pot Holder and Pumpkin Pot Holders will look cute in the kitchen next to the Cauldron Bowl Cozy!

How to get the
Ghost Pot Holder crochet pattern:

Crochet Ghost Pot Holder with cookie mix in the Pocket, the crochet Ghost is holding a pumpkin

Option 1: Continue scrolling for free pattern instructions on this site

Option 2: Purchase the ad-free PDF, that includes tutorial photos, from one of my shops

ETSY | RAVELRY

Materials

100% Cotton Worsted Weight Yarn (#4)

  • White [4oz/205yds]
  • Black [½oz/25yds]
  • Orange [½oz/25yds]
  • Green [Scraps]
  • Pink [Scraps]

I/9/5.50mm

1/4 yd 100% Cotton Batting (Optional, but recommended)

Scissors or Rotary Cutter (For cutting batting)

Yarn Needle

Get these Materials on Amazon!

Gauge

12 sts x 12 rows = 4″

Gauge is not critical for this project

Finished Measurements

8.75″W x 10.25″H

Stitch Guide

arnd = around

ch = chain

dc = double crochet

dec = single crochet decrease

hdc = half double crochet

sc = single crochet

sl st(s) = slip stitch(es)

Skill Level

Intermediate

Written in U.S. Terms

Crochet Ghost Pot Holder Pattern
Notes
  • Beginning chains do not count as stitches.
  • Where asterisks appear, repeat the instructions between them. 
  • Where parenthesis appear within the instructions, work those stitches all into the same space.
  • Batting is used for heat resistance. This will provide more padding and protection from hot surfaces, however, two layers of crocheted cotton is typically thick enough for short term protection (from oven to stove top). Cotton Batting can be found in any store that sells fabric.
  • 100% cotton yarn (and batting) is recommended. Acrylics can melt if they become too hot.
  • A yard of fabric = 36″H, 1/4 yard of fabric = 9″H, but the width is 54″ wide. Batting doesn’t have a specific cutting direction.
Special Stitches

reverse single crochet (rsc) = Work single crochet in opposite direction by inserting hook in next stitch (to the right if right-handed or to the left if left-handed), yarn over and draw up a loop, yarn over and draw through both loops on hook.

Instructions

FULL PANEL (Make 2)

With White,

R1. Ch 14, *dc, sc* across, dc in last ch, turn (13)

R2. Ch 2, (dc, sc) in 1st st, *dc, sc* across to last st, (dc, sc) in last, turn (15)

R3-6. Repeat R2; ending stitch count will be (23)

R7. Ch 1, *sc, dc* across to last st, sc in last, turn (23)

R8. Ch 2, *dc, sc* across to last st, dc in last, turn (23)

R9-26. Repeat R7 & R8, alternating

R27. Ch 2, 2 dc x 2, dc, 2 dc, dec, sl st, dec, 2 dc, dc x 3, 2 dc, dec, sl st, dec, 2 dc, dc, 2 dc x 2; Fasten. (21 dc, 4 dec, 2 sl st = 27 sts)

Crochet Ghost Pot Holder with Pocket, Ghost is holding a pumpkin

POCKET PANEL

With White,

R1. Ch 24, *sc, dc* across to last st, sc in last, turn (23)

R2. Ch 2, *dc, sc* across to last st, dc in last, turn (23)

R3. Ch 1, *sc, dc* across to last st, sc in last, turn (23)

R4-16. Repeat R2 & R3, alternating; ending with an R2 repeat

R17. Ch 2, 2 dc x 2, dc, 2 dc, dec, sl st, dec, 2 dc, dc x 3, 2 dc, dec, sl st, dec, 2 dc, dc, 2 dc x 2; Fasten. (21 dc, 4 dec, 2 sl st = 27 sts)

R18. Attach yarn to the corner of R1: Ch 1, sc in each st across the top, do not turn

R19. Ch 1, rsc across; Fasten.

EYES (Make 2)

With Black,

R1. Make magic ring, ch 1, 4 sc in ring (4)

R2. 2 sc arnd (8)

R3. *2 sc, sc* arnd; Fasten. (12)

MOUTH

With Black,

R1. Make magic ring, ch 1, 6 sc in ring (6)

R2. 2 sc arnd (12)

R3. *2 sc, sc* arnd; Fasten. (18)

ARMS (Make 2)

With White,

R1. Ch 5, sc in 2nd ch from hook and across, turn (4)

R2. Ch 1, 2 sc, sc x 2, 2 sc, turn (6)

R3-11. Ch 1, sc across, turn (6)

R12. Ch 1, sc in each st and in the end of each row around the outside; Fasten. (34)

Crochet Ghost Pot Holder with Pocket, Ghost holding a pumpkin

PUMPKIN

With Orange,

R1. Make magic ring, ch 1, 6 sc in ring (6)

R2. 2 sc arnd (12)

R3. *2 sc, sc* arnd (18)

R4. 2 hdc, sc x 2, *2 sc, sc x 2* arnd to last 3 sts, 2 hdc, sl st x 2; Fasten. (18)

With Green,

R5. Attach yarn to 1st sl st, sc in same space and in next sl st, turn (2)

R6. Ch 1, sc across, ch 1, sl st to edge of last sc; Fasten.

HANGER

With White,
Ch 16, sc in back bump of 2nd ch and across; Fasten. (15)

Finishing
  • Cut batting to roughly the shape and size of the full panels. 
  • Lay back panel flat and lay batting on top, so the bottom edges line up.
  • Thread needle with White yarn, insert needle from front to back, then from back to front one stitch over, and tie tails into a knot (on batting side). — Repeat this step multiple times. <This step tacks the 2 layers together and holds the batting in place. >
  • Lay the other full panel over the batting, then lay the pocket panel over the top, lining up the bottom edges.
  • Insert hook in bottom right corner, through all 3 crochet layers, and with White yarn single crochet in the same space and in the end of each row up the side, in each stitch across the top, in the end of each row down the left edge; Switch to White yarn and single crochet in each stitch across the bottom;Fasten. Make sure you’re working through all the crochet layers around. Do not crochet across the top of the pocket.
  • Attach Eyes to the front of the pot holder 4 rows from the top, leaving approximately 4 stitches between them.
  • Shape the mouth into an oval shape as desired.
  • Attach Mouth to the front of the pot holder 8 rows from the top and centered between the eyes.
  • Attach the pumpkin to the front center of the pocket panel, so the tip of the stem is over R18 of the pocket. 
  • Attach arms to the front side edges of the pocket, tipped slightly down, so the edge of the arms (“fingers”) overlaps R4 on the pumpkin.
  • Stitch Cheeks under eyes, leaving one row between the eye and cheek. 
  • Attach the hanger to the upper left corner as desired.
  • Optional: With White, stitch “shine” onto eyes. I did mine in the upper right quadrant.
  • Optional: stitch on eyelashes. (Not shown)
  • Hide all strings.

And that’s how you make the crochet ghost pot holder!

Crochet Ghost Pot Holder with Pocket, Ghost holding a pumpkin

Join our crochet community group!

Come on over and join the Blackstone Designs Crochet Community on Facebook for fun CALs and giveaways, plus exclusive sales, pattern support, and so much more!




Don’t forget to share!

Tag me on Instagram at @blackstone_designs or use the hashtag #BlackstoneDesignsCrochet so I can share your makes with the community!


Happy Crocheting!

Written pattern and photographs © 2023 Sonya Blackstone of Blackstone Designs. Please do not sell, share, or modify this pattern, but instead share the link to where the pattern can be found. You may sell items you make with this pattern. This pattern, as with all Blackstone Designs/Sonya Blackstone patterns, are not for educational use without written permission from the designer.  All rights reserved.

Sonya Blackstone is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Similar Posts

3 Comments

  1. I am really anxious to start this Ghost potholder project, but I am having some problems with the instructions. Do you have a short video of this project?

Leave a Reply

Your email address will not be published. Required fields are marked *