How to Make the Chihuahua Pot Holder – Free Crochet Pattern

Materials

100% Cotton Worsted Weight Yarn (#4)

• Fur Color
  • Tan – 175 yards
• Collar Color – 50 yards
• Tag Color – 10 yards

I/9/5.50mm Hook

18mm Animal Eyes or Black Buttons 

18mm Dog Nose or Black Button

Yarn Needle

Scissors

Optional Materials: 

1/4 yd 100% Cotton Batting (Optional, but recommended)

Rotary Cutter (For cutting batting)

Black Embroidery Floss (mouth)

Gauge

12 sts x 12 rows = 4″

Gauge is not critical for this project

Finished Measurements

9.25″W x 10.25″H

Stitch Guide

arnd = around

ch = chain

dc = double crochet

dec = single crochet decrease

sc = single crochet

sc3tog = See Special Stitches

sl st(s) = slip stitch(es)

Skill Level

Intermediate

Written in U.S. Terms

Notes

• Plastic can melt when coming in contact with hot dishes, so it may be better to stitch on the eyes and nostrils; especially if gifting. You could also add a warning label to the pot holder if you go forward with using plastic pieces.
• 100% cotton yarn (and batting) is recommended. Acrylics can melt if they become too hot.
• Batting is used for heat resistance. This will provide more padding and protection from hot surfaces, however, two layers of crocheted cotton is typically thick enough for short term protection (from oven to stove top). Cotton Batting can be found in any store that sells fabric.
• A yard of fabric (batting) = 36″H, 1/4 yard of fabric = 9″H, but the width is 54″ wide and batting doesn’t have a specific cutting direction.
• Beginning chains do not count as stitches.
• When stitches appear in parentheses, work those stitches in the same space.
• When asterisks appear, repeat the instructions between them.
• Muzzle shown is custom and is not represented in the instructions.
• Please use the finished project image for help in assembling. Additional tutorial photos are at the end.
• PRO TIP: Remembering that scs are worked into dcs and dcs are worked into scs (in subsequent rows) is helpful in working through this pattern quickly without having to read every row.

Special Stitches

Single Crochet Three Together (sc3tog) = *Insert hook in stitch and draw up a loop* over the next 3 stitches, yarn over, draw loop through all four loops on the hook.

Instructions

LARGE PANEL (Make 2)

With Tan,

R1. Ch 20, sc in 2nd ch from hook, *dc in next, sc in next* across, turn (19)  

R2. Ch 1, (sc, dc) in first st, sc in next, *dc, sc* across, (dc, sc) in the last st, turn (21)

R3. Ch 1, (sc, dc) in first st, sc in next, *dc, sc* across, (dc, sc) in the last st, turn (23)

R4. Ch 1, (sc, dc) in first st, sc in next, *dc, sc* across, (dc, sc) in the last st, turn (25)

R5. Ch 1, *dc, sc* across, dc in last st, turn (25)

R6. Ch 1, *sc, dc* across, sc in last st, turn (25)

R7-21. Repeat R5 & 6

R22. Ch 1, dec, *sc, dc* across, sc, dec, turn (23)

R23.  Ch 1, *sc, dc* across, sc in last, turn (23)

R24. Ch 1, dec, *dc, sc* across, dc, dec, turn (21)

R25. Ch 1, *dc, sc* across, dc in last, turn (21)

R26. Ch 1, dec, *sc, dc* across, sc, dec, turn (19)

R27.  Ch 1, *sc, dc* across, sc in last, turn (19)

R28. Ch 1, dec, *dc, sc* across, dc, dec, turn (17)

R29.  Ch 1, dec, *dc, sc* across, dc, dec; Fasten. (15)

POCKET PANEL (Make 1)

With Tan,

R1. Ch 20, sc in 2nd ch from hook, *dc in next, sc in next* across, turn (19)  

R2. Ch 1, (sc, dc) in first st, sc in next, *dc, sc* across, (dc, sc) in the last st, turn (21)

R3. Ch 1, (sc, dc) in first st, sc in next, *dc, sc* across, (dc, sc) in the last st, turn (23)

R4. Ch 1, (sc, dc) in first st, sc in next, *dc, sc* across, (dc, sc) in the last st, turn (25)

R5. Ch 1, *dc, sc* across, dc in last st, turn (25)

R6. Ch 1, *sc, dc* across, sc in last st, turn (25)

R7-17. Rep R5 & 6

With Collar Color, 

R18. Ch 1, sl st across, turn (25)

R19. Ch 1, sc in top loop across, turn (25)

R20. Ch 1, sc across, turn (25)

R21. Ch 1, sc across; Fasten. (25)

MUZZLE

With Tan,

R1. Make magic ring, ch 1, 6 sc in ring (6)

R2. 2 sc arnd (12)

R3. *2 sc, sc* arnd; Faten. (18)

FRONT/TOP PAWS (Make 2)

With Tan,

R1. Ch 4, sc in 2nd st and in each st across, turn (3)

R2. Ch 1, 2 sc, sc, 2 sc, turn (5)

R3. Ch 1, sc across, turn (5)

R4-11. Repeat R3; at the end of R11 turn slightly and sc in the end of each row down the side, sc in each st across the bottom, sc in the end of each row up the other side; Fasten.

BACK PAWS (Make 2)

With Tan,

R1. Ch 4, sc in 2nd st and in each st across, turn (3)

R2. Ch 1, 2 sc, sc, 2 sc, turn (5)

R3. Ch 1, 2 sc, sc x 3, 2 sc, turn (7)

R4. Ch 1, sc across; at the end of R4 turn slightly and sc in the end of each row down the side, sc in each st across the bottom, sc in the end of each row up the other side; Fasten.

EARS (Make 4)

With Tan,

R1. Ch 8, sc in 2nd st and in each st across, turn (7)

R2-4. Ch 1, sc across, turn (7)

R5. Ch 1, dec, sc x 3, dec, turn (5)

R6-8. Ch 1, sc across, turn (5)

R9. Ch 1, dec, sc, dec, turn (3)

R10. Ch 1, sc across, turn (3)

R11. Ch 1, dec, turn (1)

R12. Ch 1, sc across; Fasten at the end of R12, hold two ears together, and sc in the end of each row down the side, sc in each st across the bottom, sc in the end of each row up the other side, sl st to join in 1st side st working through both layers; Fasten. Repeat with other two ear pieces.

TAIL

With Tan,

R1. Ch 3, sc in 2nd and in last st, turn (2)

R2-4. Ch 1, sc across, turn (2)

R5. Ch 1, dc, sl st, turn (2)

R6. Ch 1, sc across, turn (2)

R7. Ch 1, dc, sl st, turn (2)

R8. Ch 1, sl st, dc, turn (2)

R9. Ch 1, dc, sl st, turn (2)

R10-12. Ch 1, sc across, turn (2)

R13. Ch 1, dc, sl st, turn (2)

R14-15. Ch 1, sc across, turn (2)

R16. Ch 1, sl st, sc, dc, turn (2)

R17. Ch 1, sc3tog; at the end of R25, turn slightly and sc in the end of each row down the side, sc in each st across the bottom, sc in the end of each row up the other side, ch 2, sl st to join in 1st sc; Fasten.

COLLAR TAG

With Tag Color,

Ch 6, (hdc, dc, hdc) in 2nd ch from hook, sc x 3 over next three chs, (hdc, dc, hdc, sl st, hdc, dc, hdc), sc x 3, (hdc, dc, hdc, sl st) in first st; Fasten. (12)

HANGER

With Fur Color,

Ch 16, sl st in back bump of 2nd ch and across; Fasten. (15)

Finishing

• If using plastic safety nose: Insert the safety nose into the muzzle between two stitches on R3. Attach the Dog Muzzle to the front center of one large panel, over R20-24, bring the center strip up over R25-28. 
• If using plastic safety eyes: Insert eyes between R25-26, one on each side of the muzzle, leaving approximately 1 stitch between the muzzle and each eye.
• Measure and cut batting, so it’s the same size as the large panel, minus ¼” around the edges.
• Lay bottom large panel flat and lay batting over the top. Lay the top large panel over the batting, sandwiching the batting between the two large panels.
• Thread needle with coordinating yarn and on large panel: Insert needle from front to back, then from back to front one stitch over, close to the upper right corner. Tie tails into a knot. — Repeat this step 8 more times in the following locations: right center, bottom right corner, bottom middle, center, upper middle, upper left corner, left center, bottom left corner. <This step tacks the 3 layers together and holds the batting in place. >
• Insert hook under the panel and pull the tails and knots to the inside of the pot holder to hide them.
• Lay pocket panel over the top large panel.
• Insert hook in bottom right corner, through all 3 layers, and single crochet in the same space and in the end of each row up the side, in each stitch across the top, and end of each row down the left edge, and in each stitch across the bottom. Fasten. Make sure you’re working through all crochet layers around. To do this I started with tan, switched to blue to work across the collar, then switched back to tan. Do not crochet across the top of the pocket.
• Attach Dog Ears to the top edge on the back large panel, so the center of the ear is lined up with the “corner” of the panel; tilt the tips of the ears outward (very slightly).
• Attach Top Paws over rows 11-17 approximately, tipped downward. 
• Attach Bottom Paws over rows 1-4, with the flat side on the bottom, leaving approximately 5 stitches between them.
• Dog Tail = Attach R1-5 of the tail to the back panel over R4-6 approximately. Bring tail up and attach R16-17 of the tail to the back panel.
• Attach the collar tag to the front center of top large panel between R17-18. 
• Attach the hanger to the desired upper corner.
• Optional: Stitch on a mouth with the embroidery floss.
• Hide all strings.